Stainless Steel Mini Grip
Multi use connecting ancillary used to simplify structural joining in timber roof, wall, ceiling and floor framing
Pre-punched and formed stainless steel steel timber connectors ideal for:
Light timber to timber connections, i.e. Timber pergolas, fences etc.
Reinforcing joints at right angles.
Joining timber components rapidly and efficiently.
Multinail Mini Grip should be secured with at least 4/30mm x 2.8Ø Multinail stainless steel nails.
Do not bend the grip when using.
LIMIT STATE DESIGN LOADS
|Joint||Capacity (kN) per Mini Grip|
|Dead load||Dead load + Floor LL||Dead Load + Roof LL||Dead Load + Wind Load|
NOTE: The capacities are derived from AS1720-2010 and are for uplift in houses where failure is unlikely to affect an area greater than 25m2. For primary elements in structures other than houses or elements in a house for which failure would be greater than 25m2 these capacities must be multiplied by 0.94. For primary joints in essential services or post disaster buildings multiply by 0.88. The capacities are for structural joints for houses for which failure would be unlikely to affect a plan area greater than 25m2.
For 2/Mini Grips the table values can be doubled.
DESCRIPTION AND PACKAGING
Manufactured from 1.0mm Galvanised G300 Z275 Steel
|Description||Product Code||Reference||Code||Carton quantity||Carton kg.|
|30mm x 2.8Ø Multinail Stainless Steel Nails (SN30280)`|