You are not authorised to view this resource.

Mini Grip

Multi use connecting ancillary used to simplify structural joining in timber roof, wall, ceiling and floor framing

Pre-punched and formed galvanised steel timber connectors ideal for:
Light timber to timber connections, i.e. Timber pergolas, fences etc.
Reinforcing joints at right angles.
Joining timber components rapidly and efficiently.


Multinail Mini Grip should be secured with at least 4/30mm x 2.8Ø Multinail nails.
Do not bend the grip when using.


Joint groupCapacity (kN) per Mini Grip
Dead loadDead load + Floor LLDead Load + Roof LLDead Load + Wind Load
J2 0.9 1.0 1.2 2.2
J3 0.6 0.8 0.8 1.5
J4 0.4 0.5 0.6 1.0
JD3 0.9 1.0 1.2 2.2
JD4 0.6 0.8 0.8 1.5
JD5 0.5 0.6 0.7 1.3

NOTES: The capacities are derived from AS1720-2010 and are for uplift in houses where failure is unlikely to affect an area greater than 25m2. For primary elements in structures other than houses or elements in a house for which failure would be greater than 25m2 these capacities must be multiplied by 0.94. For primary joints in essential services or post disaster buildings multiply by 0.88. The capacities are for structural joints for houses for which failure would be unlikely to affect a plan area greater than 25m2.

For 2/Mini Grips the table values can be doubled.


Manufactured from 1.0mm Galvanised G300 Z275 Steel

DescriptionProduct CodeReference CodeCarton quantityCarton kg.
Mini Grip TA005 MNG-500 500 15.0
30mm x 2.8Ø Multinail Nails (TA302)